Earl's, Aeroquip And Speedflow Hose And Fittings

Pre - Assembled Hoses
For brake, hydraulic and gauge applications

Swedge drawing

These factory assembled brake hoses are manufactured from the same Speed - Flex stainless steel braid - protected, extruded PTFE hose that is the standard of the racing industry, using crimp and swedged permanently installed hose ends. All hoses are tested to 4000 PSI. We recommend that all brake hoses be installed by a professional to insure that they cannot crimp, kink or stretch under any condition of steering angle or wheel travel. To find the correct adapter fittings for calipers and hard line to hose, click here.

63010110

- 3 Hose, - 3 AN Female Thread, Both Ends

Part No.

Length

63010110

10"

63010112

12"

63010114

14"

63010116

16"

63010118

18"

63010120

20"

63010122

22"

63010124

24"

63010126

26"

63010128

28"

Need A Length Not Shown Here - Ask Us !

Quantity: Part No.

 


63011710

- 3 Hose, - 3 AN Female Thread to - 3 90 Degree Female

Part No.

Length

63011710

10"

63011712

12"

63011714

14"

63011716

16"

63011718

18"

63011720

20"

63011722

22"

63011724

24"

63011726

26"

63011728

28"

Need A Length Not Shown Here - Ask Us !

Quantity: Part No.

 


64191910

- 4 Hose, - 4 AN Female Thread, both ends

Part No.

Length

64191910

10"

64191912

12"

64191914

14"

64191916

16"

64191918

18"

64191920

20"

64191922

22"

64191924

24"

64191926

26"

Need A Length Not Shown Here - Ask Us !

Quantity: Part No.

 


Baker Phone / Fax Numbers

Aeroquip Index